Yearly Archives: 2013

/2013
­

Precommissioning 5 Headlines Wind Turbines Generator feeder protections F650 (Ormazabal/Alstom).

AGS-PMC in collaboration with GE Multilin carries out the commissioning in Ashegoda wind Farm, Ethiopy. This wind farm is located in Mekele, 1600 m over sea level. This country has huge lands with awesome green energy conditions. Wind Farm has 75 WTG 1.6 MW each one, protected by 5 F650 protection relays in each head [...]

By |September 17th, 2013|news|0 Comments

Ags as a representative of GE Multilin makes New MCC testing

Ags as a representative of GE Multilin makes New MCC testing at phase B in Amal Steam Project in Oman continuing works begun last year (in March 2012) with tests of phase A. We thank Al Hassan Swichgear and PDO (Petroleum Development Oman) for their assistance in the development of the work and the trust [...]

By |August 21st, 2013|news|0 Comments

Maintenance medium voltage protections Mine Chirano (Ghana)

AGS has been required to perform the maintenance and adjustment of electrical protection facilities Chirano Gold Mine Limited in Ghana. The work has been successfully developed both within and form, giving himself a close collaboration with the staff of Chirano Gold Mine Limited to which we have to thank all the help provided. During the [...]

By |July 3rd, 2013|news|0 Comments

AGS participates in the startup of the control system of 50 MW wind farm in Tangier.

AGS participates in the startup of the control system of 50 MW wind farm in Tangier. This project is funded by European funds, and will serve to integrate more green energy into the electrical system of Morocco.

By |May 21st, 2013|news|0 Comments

Power Solutions instructs AGS a 6MW plant in the city of Cuzco in Peru

Power Solutions instructs AGS Protection, Measurement and Control the installation, assembly, configuration and operation of a 6MW plant in the city of Cuzco in Peru. The plant in question consisted of 6 MTU gensets, which were regulated in power for its correct operation, because Cuzco is located at an altitude of over 3,000 meters above [...]

By |May 10th, 2013|news|0 Comments

The 26th finished the third edition of the Hall of Renewal in Maspalomas.

The 26th finished the third edition of the Hall of Renewal in Maspalomas. As expected HABITEQ was very popular and we have begun to develop Renovation Projects with this solution that saves Hoteliers in his reforms up to 70% of their investment.

By |May 9th, 2013|news|0 Comments

AGS PARTICIPATION IN THE “SALON III RENEWAL”

We are pleased to announce the participation of AGS in the “Hall of Renewal III” to be held in the Convention Center Expomeloneras to date 25 and April 26. The modernization and renovation of the existing resort and commercial South of Gran Canaria is one of the objectives of the Consortium, understanding that the retraining [...]

By |April 12th, 2013|news|0 Comments

Completing secondary testing G60 protection relay

Completed secondary testing G60 protection relay (Generator), Control Panel functionality and protection and both wired interfaces (contacts) and analog (transducers) and digital (Modbus communication) in the first two powered units (A and B) within CLOV project in South Korea. The project consists of an oil-refinery FPSO (Float Production, Storage and Overboard) 2,300 million, part of [...]

By |March 12th, 2013|news|0 Comments

Secondary Test for a 65 MVA generator in Chennai

AGS has made secondary testing of protection and control panel for a 65MVA generator. This is the first project of AGS and GE Multilin in India.

By |February 6th, 2013|news|0 Comments

Commissioning & Precommissioning 5 Gas Turbines (Nuovo Pignone GE)

AGS in collaboration with GE Multilin almost finished that project in a huge LNG Train Plant (propriety of Sonatrach), in Skikda Algiers. This plant has a budget of more than 4 billion dollars. This project has started in 2007. Main purpose was to build a new LNG train after the explosion suffered in December 2003. [...]

By |January 17th, 2013|news|0 Comments

This is a demo store for testing purposes — no orders shall be fulfilled.