news

AGS, in collaboration with GE MULTILIN & GE OIL&GAS, has performed all necessary modifications on Unit Control Panel #2 (UCP2) to permit the TG operation in parallel mode with the national electrical grid in M´BOUNDI refinery facilities located in POINTE NOIRE (Republic of Congo) The new 6 kV switchboard configuration is shown in the below [...]

AGS, in collaboration with GE MULTILIN and GE OIL&GAS, has performed the FAT in GE OIL&GAS NUOVO PIGNONE, Massa Plant, Italy, for the following projects: FPSO Pioneiro de Libra: pre-commissioning and commissioning tests of the GCPP for a 24 MVA generator. Test bench for Yamal project: pre-commissioning and commissioning tests of the GCPP for a [...]

AGS, in collaboration with GE MULTILIN and GE OIL & GAS, has performed the start-up of protection panel of one generator unit in TUPRAS refinery facilities located in Körfez city, Kocaeli province (Turkey). For this purpose, it was carried on the primary tests commissioning of Generator Control and Protection Panel (GCPP) of the steam turbine [...]

AGS, in collaboration with GE MULTILIN and GE OIL & GAS, has performed the load tests of two gas turbines in the JGC group refinery located in BIR SEBA (Algeria). For this purpose, it was carried on the load tests commissioning of Generator Control and Protection Panel (GCPP) of both gas turbines of 25 MVA [...]

AGS, in collaboration with GE MULTILIN and GE OIL&GAS, has performed the start-up of protection panel of one generator unit in refinery of Sonangol Company located in Luanda (Angola). For this purpose, it was carried on the tests commissioning of Generator Control and Protection Panel (GCPP) of the second gas turbine included in combined cycle [...]

AGS in collaboration with GE Multilin has successfully completed the cold commissioning of the protections of a 30 MW generator in a sulphuric acid production plant in Samsun (Turkey). AGS will be providing technical assistance again in November 2015 to complete the hot commissioning of the generator.

During the month of January 2015, summer in the region of the Atacama Desert, the driest in the world, one of the engineers of AGS-PMC, has worked with GE MULTILIN staff, to complete the protection testing for the startup of ‘San Pedro III’ electrical substation. The substation connects a photovoltaic plant of 30MW ampliable to [...]

AGS, in collaboration with GE Multilin, completed the secondary injection in GCPP (Control panels and generator protection) of the 2nd generator of the power plant that supply the Port of Dos Bocas, operated by PEMEX and brings logistic support to the hydrocarbons exploration and production activities offshore of the Gulf of Mexico, in Paraiso – [...]

AGS, in collaboration with GE MULTILIN and GE OIL&GAS, has performed the secondary test commissioning of three GCPP, manufactured by Preipolar in Chennai, India, and integrated in the Dangote Fertilizer Company Project. In each GCPP, AGS staff was tested the protections of 33MW generator (G60) and the synchronization (syn3000). Thanks to the strategic location of [...]

Ags collaborates in the commissioning of new electrical room in it building for Qatar Petroleum Dukhan. The room HV and LV has Eaton panels and GE protections. Ags has provided and tested protective relays and assisted the Eaton staff and functional test and settings changes according to the requirements Qatar Petroleum.

AGS assists in the integration of the new GE control system for substations in Qatar Petroleum in Refinery Mesaieed. The role of Ags has been do functional testing of relays MM300 and at the same time integrate into the control system of GE positions tested , SIDAQ auxiliary positions and Battery Chargers

PABOASE 11KV G.E. SECOGEAR CHIRANO GOLD MINE (KINROSS) AGS-PMC has performed the manufactured and supply of the new brand 11KV Switchgear for the Paboase Undeground Mining Area at the Chirano Gold mine (property of Kinross) in Bibiani/Ghana as the ongoing expansion project on this area requires an updated switchgear, power generator and electrical distribution to [...]

AGS, in collaboration with GE MULTILIN and GE OIL&GAS, has performed the start up of protection panel of one generator unit in refinery of Sonangol company located in Luanda (Angola). For this purpose, it was carried on the tests commissioning of protection and control panels (GCPP) for a gas turbine included in combined cycle plant [...]

AGS-PMC has developed the electrical study and settings of the protection system in HYATT ZIVA HOTEL, placed in MONTEGO BAY, JAMAICA, which is being built in this moment by HUMICLIMA. The experience and confidence of AGS-PMC in this kind of studies and medium and high voltages systems, was the key value to be the only [...]

AGS, in collaboration with GE MULTILIN and GE OIL&GAS, has performed the FAT in GE OIL&GAS NUOVO PIGNONE, Massa Plant, Italy. The test of pre-commissioning and commissioning of the GCPP for Aasta Hansteen (25MVA), Egina (38MVA) and the pre-commissioning of Gina Krog (41 MVA) were successfully done. The Egina project is located in Nigeria, the [...]

GE Oil & Gas supply four LM2500+ G4 SAC aeroderivative gas turbines for power generation and five compressors for a floating production storage and off-loading (FPSO) platform that will play a critical role in CLOV, the fourth development pole in deepwater Block 17 after Girassol, Dalia and Pazflor. Located around 240 kilometers from Luanda and [...]

AGS-PMC in collaboration with GE Multilin, carried out a generator (44.7 MVA) protection commissioning to Phase 1, in a Biomass plant in Runcorn, Manchester (UK). The generator is protected by two G60´s protection relays (redundant protection) from UR family relays (GE Multilin). The TPS RUNCORN biomass plant has two important targets: -On the one hand [...]